The Water Jet cutting technique uses the highest pressure of water for cutting the software, materials such as foam and rubber. There are many different abrasives for adding the high pressure water so that it will be quite efficient for resulting in the jet cuts in the abrasive manner. The technique is also useful for cutting the hardened materials such as steel, glass, hard rock, titanium, bullet proof glass, ceramics and many more available. High pressure is used for cutting the tiny orifice and also concentrating more amount of energy in the cutting the tiny area of the material in the best manner. The water will be pressurized with the intensifier pump in the 6200 pressure bar which is 90,000 psi. The water will be forced into the diameter that is required to cut with the higher velocity through a beam. The professional water jet cutting services St Louis provide the environment friendly cold cutting process.
Cost Effective Cutting Process:
Water Jet cutting also produces no heat so that it will not affect the nearby areas in the metal. The maximum temperature will be in the nozzle so that the water will be pierced in the temperature of 50°C. The water as well as sand will be the cutting medium, so that there will not be any hazardous wastes generated in the cutting process so that they will be environmental friendly. Up to 170 mm of the Stainless Steel thickness can be cut easily so that it is necessary for choosing the best company for the water jet cutting in the best manner accurately. The cnc waterjet cutting system St Louis will be very accurate for the better cutting accuracy with the +/- 0.03 mm so that it will be quite efficient for increasing the cutting of metals in the safest manner.
No comments:
Post a Comment